search

ID TECH Omni Manual de usuario Pagina 3

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 2
5 2
SPECIFICATIONS
Power Requirements,
Bar Code: Power +5 VDC +/-10% (35mA maximum).
Ground 0 VDC (GND).
Power Requirements,
Magnetic: Power +5 VDC +/-10% (50mV ripple maximum).
Ground 0 VDC (GND). Chassis Ground connected
to GND and magnetic head case.
Operating Current: 30mA maximum for bar code only. 5mA for magnetic stripe
only.
Operating
Temperature: 32° F to 131° F (0° C to 55° C).
Weatherproof Option: -31° F to 140° F (-35° C to 60° C) without ice
build-up on magnetic head.
Storage Temperature: -31° F to 140° F (-35° C to 60° C).
Relative Humidity: Maximum 95% non-condensing.
Magnetic Head Life: 1,000,000 passes minimum.
Rail and Cover Life: 1,000,000 passes minimum.
Magnetic Read Rate: Less than one error in 500,000 bits on cards
conforming to ISO 7811 1-5 (not induced by
operator error).
Bar Code Source
Light: Visible red 660 nm or Infrared 930 nm.
Minimum Bar Code
PCS: 60%.
Bar Code Centerline: .49 inches (12.50mm) from bottom of slot to center of
reading window.
Bar Code Resolution: .006 inches (6 mil) minimum.
Magnetic Stripe
Formats: ISO 7811, AAMVA, and CA DMV.
Swipe Speed: Bar Code 5 to 65 inches per second, bi-directional.
Magnetic Stripe 3 to 60 inches per second,
bi-directional.
Card Width: Bar code media .005 to .050 inches.
Magnetic stripe media .01 to .050 inches.
5 2
I/O for magnetic stripe only reader
with Tinned Wires
COLOR SIGNAL
BROWN DATA 1
YELLOW DATA 2
ORANGE DATA 3
BLUE CLK 1
GREEN CLK 2
GRAY CLK 3
WHITE CARD PRESENT
RED +5 VDC
BLACK GROUND
I/O for bar code only reader with
Tinned Wires
COLOR SIGNAL
PURPLE BAR CODE DATA
RED +5 VDC
BLACK GROUND
MAGSTRIPE DATA, CLOCK & CARD PRESENT
SIGNALS
The following is a timing diagram of typical DATA and CLOCK signals from
ID TECH electronics:
I/O for magnetic stripe only reader
with Tinned Wires
COLOR SIGNAL
BROWN DATA 1
YELLOW DATA 2
ORANGE DATA 3
BLUE CLK 1
GREEN CLK 2
GRAY CLK 3
WHITE CARD PRESENT
RED +5 VDC
BLACK GROUND
I/O for bar code only reader with
Tinned Wires
COLOR SIGNAL
PURPLE BAR CODE DATA
RED +5 VDC
BLACK GROUND
MAGSTRIPE DATA, CLOCK & CARD PRESENT
SIGNALS
The following is a timing diagram of typical DATA and CLOCK signals from
ID TECH electronics:
SPECIFICATIONS
Power Requirements,
Bar Code: Power +5 VDC +/-10% (35mA maximum).
Ground 0 VDC (GND).
Power Requirements,
Magnetic: Power +5 VDC +/-10% (50mV ripple maximum).
Ground 0 VDC (GND). Chassis Ground connected
to GND and magnetic head case.
Operating Current: 30mA maximum for bar code only. 5mA for magnetic stripe
only.
Operating
Temperature: 32° F to 131° F (0° C to 55° C).
Weatherproof Option: -31° F to 140° F (-35° C to 60° C) without ice
build-up on magnetic head.
Storage Temperature: -31° F to 140° F (-35° C to 60° C).
Relative Humidity: Maximum 95% non-condensing.
Magnetic Head Life: 1,000,000 passes minimum.
Rail and Cover Life: 1,000,000 passes minimum.
Magnetic Read Rate: Less than one error in 500,000 bits on cards
conforming to ISO 7811 1-5 (not induced by
operator error).
Bar Code Source
Light: Visible red 660 nm or Infrared 930 nm.
Minimum Bar Code
PCS: 60%.
Bar Code Centerline: .49 inches (12.50mm) from bottom of slot to center of
reading window.
Bar Code Resolution: .006 inches (6 mil) minimum.
Magnetic Stripe
Formats: ISO 7811, AAMVA, and CA DMV.
Swipe Speed: Bar Code 5 to 65 inches per second, bi-directional.
Magnetic Stripe 3 to 60 inches per second,
bi-directional.
Card Width: Bar code media .005 to .050 inches.
Magnetic stripe media .01 to .050 inches.
I/O for magnetic stripe & bar code
reader with Tinned Wires
COLOR SIGNAL
BROWN DATA 1
YELLOW DATA 2
ORANGE DATA 3
BLUE CLK 1
GREEN CLK 2
GRAY CLK 3
WHITE CARD PRESENT
PURPLE BAR CODE
DATA
RED +5 VDC
BLACK GROUND
I/O for magnetic stripe & bar code
reader with Tinned Wires
COLOR SIGNAL
BROWN DATA 1
YELLOW DATA 2
ORANGE DATA 3
BLUE CLK 1
GREEN CLK 2
GRAY CLK 3
WHITE CARD PRESENT
PURPLE BAR CODE
DATA
RED +5 VDC
BLACK GROUND
Vista de pagina 2
1 2 3 4

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Lectores De Tarjetas Magnéticas ID TECH Omni
Lectores De Tarjetas Magnéticas ID TECH EasyMag Especificaciones   (6 paginas)
Lectores De Tarjetas Magnéticas ID TECH MiniMag II Especificaciones   (5 paginas)
Lectores De Tarjetas Magnéticas ID TECH EconoWriter Manual de usuario   (66 paginas)
  • Skutch-electronics Richell Euroheat Marvin Boyertown Furnace
  • JBL Cajas para equipos de audio Kupa No JVC Soportes De Pared Y De Techo Accesorios Philips Amplificadores de audio de coche Plaubel No
  • Bbk DV521S Yamaha YST-SW011 Pioneer AVIC-X3 Samsung GT-S5600 Acer VA270H
  • Edimax BR-6624 Ficha de datos Minolta RD-175 Manual de usuario HP Pavilion 32 QHD 32-inch Display Manual de usuario Electrolux WASL6IE300 Manual de usuario LG W2363D-PU Ficha de datos