ID TECH Omni Manual de usuario descargar pdf (Pagina 29)

EAN Settings:

Enable/Disable EAN-13

EAN-13 is a ﬁxed format symbology and there are no variations allowed. If

enabled, EAN-13 symbology will be read, subject to the reading restrictions

speciﬁed by this set of options. If disabled, the data from the symbology will

be disregarded.

SELECTION CODE: G2

EAN-13 Enable A

EAN-13 Disable B

Enable/Disable EAN-8

If enabled, EAN-8 symbology will be read, subject to the reading restrictions

speciﬁed by this set of options. If disabled, the data from the symbology will

be disregarded.

SELECTION CODE: G2

EAN-8 Enable C

EAN-8 Disable D

Send Induced Country Code Character

The EAN symbology adds an extra digit to the beginning of the data to create

a two-digit country code. If enabled, the added induced character is the ﬁrst

character transmitted. If disabled, the induced character is not transmitted.

SELECTION CODE: G2

Induced Character Enable E

Induced Character Disable F

Send Check Digit

The check digit is mandatory in the EAN symbology. If enabled, the reader

will send the decoded check digit as the last character in the data stream trans-

mitted. If not, the check character will be suppressed before transmission.

SELECTION CODE: G2

Send Check Digit G

Do Not Send Check Digit H

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Sin comentarios

ID TECH Omni Manual de usuario Pagina 29